The Larus StarClock TiemPo™ 6400 is a totally integrated and modular system for use in advanced Next Generation Network NTP packet synchronization applications. The TiemPo system also provides flexible and cost effective solutions to Stratum 1/PRC, Stratum 2E, 2/TNC, and Stratum 3E/LNC digital and packet transmission timing and synchronization applications.
For providing precise time through ethernet packet networks, either a low cost integrated SNTP solution can be ordered, or with the optional DigiTimeTM module, providing Precision Time Protocol (PTP-IEEE-1588v2) to support the most demanding timestamping requirements. With the installed DigiTime module accuracy to UTC down to the low single digit microsecond range is possible.
The TiemPo offers internal system monitoring and performance measurement combined with remote and local reporting in standard TL1 format, or accessed with a new web browser based Graphical User Interface (GUI).
The system can be utilized in either DS1 or E1 environments simply by selecting the appropriate software menu selections, port-by-port.The TiemPo circuit card provisioning settings and operating functions are software generated, affording both speed and flexibility in system application changes, testing, and monitoring.
Each of the output cards provides 8 outputs and the Master shelf can accommodate up to 8 output cards. The maximum number of outputs per Master shelf is 64, and can be incorporated into 1:1 protected outputs via an external Y cable. The optional Expansion shelf provides up to an additional 128 outputs (or 64 1:1 protected), for a total of 192 outputs (96 1:1 protected). A total of 4 expansion shelves can be combined to provide up to 576 total outputs (288 1:1 protected).An optional GPS Stratum 1 receiver module is available for ultra precise network timing requirements,and two can be installed per system for complete redundancy. The TiemPo is designed to provide timing for DACS, SONET equipment, digital switches, VoIP media gateways, soft switches, DWDM equipment, vocoders, and channel banks.
The available output card options include a universal output card supplying DS1, E1, CC and 2.048 Square Wave on a single card, programmable port-by-port. Other cards include IRIG-B, 5/10 MHz, Time Code with outputs of 1 PPS, 1PPM and 1PPH, 1.544 MHz/ 8KHz RS-422, and a Retiming Timing Insertion Unit (RTIU) that will re-time 2 DS1s per card to Stratum standards.
If your GPS antenna has to be located farther than 500 feet from the StarClockTM TiemPo 6400 system, consider the optional DUC GPS Antenna Extender Kit to avoid the hassles and cost of running expensive special low loss cable.
Download Documents:TiemPo 6400 Product Highlights
(US) (403 KB)